[{"_1":2,"_299":-5,"_300":-5},"loaderData",{"_3":4,"_222":223},"root",{"_5":6,"_7":8,"_12":13},"locale","en","languages",[9,6,10,11],"de","it","zh","posts",[14,86,104,124,144,163,183,202],{"_15":16,"_17":18,"_19":20,"_21":22,"_23":24,"_25":16,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":34,"_35":34,"_36":34,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":43,"_70":71,"_59":72,"_73":74,"_75":76,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":84,"_85":6},"id","6791c2cbffa1640052c42a43","uuid","be8e208d-e38a-4558-a177-238ce8a5a5b8","title","Product Introduction","slug","1-en-product-introduction-206","html","

Overview of Device

The TRV is designed to give users control of their heating system. This smart thermostat combines advanced temperature control with energy-saving technology. Users can easily adjust the indoor temperature as they need, and easily control the device using an app or voice assistant, to enjoy daily comfort and energy savings.

Product Innovation Points

180-degree screen rotation: Depending on the valve's orientation, the screen can rotate 180 degrees, ensuring it always faces the user.
Multifunctional button design: The three buttons have multiple functions, improving operational efficiency.
Three-battery power system: The device supports three batteries within the same size, providing longer usage time compared to similar products.

Key Features

Integrating Ecogaz into the app (This feature is available only in France)

By connecting to the Ecogaz signal, you can access real-time local natural gas status information.

Supports Offline Local Operation

Even if the internet connection is interrupted, you can still use the device's buttons to operate it. All settings, including programming parameters, modes, and temperature, are stored in the microcontroller's (MCU) flash memory, where the MCU acts as the device's brain.

Stepper Motor

The device uses a stepper motor to provide greater force and more precise control. It can achieve over 80 Newtons of force even at low voltage.

Three-Cell Battery Power

The battery life is 50% longer compared to products powered by two-cell batteries.

Multiple Modes and Flexible Scheduling

The device supports 8 modes: Comfort Mode, Energy-saving Mode, Frost Protection Mode, Off Mode, Holiday Mode, Boost Mode, Custom Mode, and Programming Mode.
Using the Smart Life app, with up to 6 time periods per day, for a 7-day schedule, allowing different settings for each day.

Easy Installation and High Compatibility

Professionals can install it easily and quickly on both new and existing water radiators without needing to drain water or adjust the heating system.
Compatible with six types of valves, covering over 97% of the valves available on the market.

Troubleshooting Self-Diagnosis

This system features a troubleshooting self-diagnosis function. It can quickly detect any issues with the system's operation and automatically perform maintenance to keep the system stable and safe.

Low-Power Technology

Features a specialized antenna design for superior range performance.

\n","comment_id","feature_image","featured",false,"visibility","public","email_recipient_filter","none","created_at","2025-01-23T04:17:15.000+00:00","updated_at","published_at","custom_excerpt","codeinjection_head","codeinjection_foot","custom_template","canonical_url","tags",[44,61,66],{"_15":45,"_46":47,"_21":47,"_48":49,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":60},"6632031abfe5a6002dbee42b","name","guide-introduction","description","标注文章为产品介绍页面","og_image","og_title","og_description","twitter_image","twitter_title","twitter_description","meta_title","meta_description","accent_color","url","https://manual-admin.rti-tek.fr/tag/guide-introduction/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},"66c83b23b02efc002d2b432c","TRV702W","trv702w","https://manual-admin.rti-tek.fr/tag/trv702w/",{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},"660a58979f2c03002dba0a21","lang-en","https://manual-admin.rti-tek.fr/tag/lang-en/","primary_tag",{"_15":45,"_46":47,"_21":47,"_48":49,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":60},"https://manual-admin.rti-tek.fr/1-en-product-introduction-206/","excerpt","Overview of Device\nThe TRV is designed to give users control of their heating system. This smart\nthermostat combines advanced temperature control with energy-saving technology.\nUsers can easily adjust the indoor temperature as they need, and easily control\nthe device using an app or voice assistant, to enjoy daily comfort and energy\nsavings.\n\nProduct Innovation Points\n * 180-degree screen rotation: Depending on the valve's orientation, the screen\n can rotate 180 degrees, ensuring it always fac","reading_time",1,"access",true,"email_subject","frontmatter","feature_image_alt","feature_image_caption","serialNumber","1","lang",{"_15":87,"_17":88,"_19":89,"_21":90,"_23":91,"_25":87,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":92,"_35":92,"_36":92,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":93,"_70":100,"_59":101,"_73":102,"_75":76,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":103,"_85":6},"6791c2d4ffa1640052c42a4a","b7b3949d-462b-496f-834e-96ca7ff5538c","Product design and accessories","2-en-product-design-and-accessories-166","

Product Design

$\"\"$

Appearance and Material:

Dimensions (W × H × D): 59.4 mm × 94.7 mm × 59.4 mm

Weight: 145 g

$\"\"$

Standard Accessories

$\"\"$

\n","2025-01-23T04:17:24.000+00:00",[94,98,99],{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},"667d1db1bfe5a6002dbef091","guide-package-contents","https://manual-admin.rti-tek.fr/tag/guide-package-contents/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},"https://manual-admin.rti-tek.fr/2-en-product-design-and-accessories-166/","Product Design\n\n\nAppearance and Material:\nDimensions (W × H × D): 59.4 mm × 94.7 mm × 59.4 mm\n\nWeight: 145 g\n\n\n\nStandard Accessories","2",{"_15":105,"_17":106,"_19":107,"_21":108,"_23":109,"_25":105,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":110,"_35":110,"_36":110,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":111,"_70":119,"_59":120,"_73":121,"_75":122,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":123,"_85":6},"6791c2e8ffa1640052c42a51","46864e39-110a-4dfb-94ab-7ba94fc7c31a","Install","3-en-install-164","

Installing the Adapter

First, check if your valve interface is M30 x 1.5mm.

If your valve interface is M30 x 1.5mm, you can directly install the product on the valve.
If your valve interface is not M30 x 1.5mm, you will need to install an adapter.

Adapter Installation Process

If you find that the valve connector type is not M30 x 1.5 mm, you need to install the adapter onto the valve.

To do this, follow these steps:

Check your valve's connector type.

$\"\"$

Choose the correct adapter.

$\"\"$

Firmly screw the adapter onto the valve and make sure it's tightly connected to avoid leaks.

$\"\"$

Install the Batteries

Using the middle button on the adapter as a reference, position the middle button facing up.

$\"\"$

Press the lock on the side of the battery cover and push up to remove the cover.

$\"\"$

Insert three new LR6 AA batteries in the correct direction.

$\"\"$

Make sure the middle button on the adapter is facing up. Then, pinch the lock on the side of the battery cover and push the lock in the opposite direction to put the cover back on.

$\"\"$

Make sure the latches click into place.

Installing the Product

Attention

The product must be installed with a valve; otherwise, an F5 error code will be displayed. Solution:

Press any button to wake up the screen.
Press the Mode button.
The display screen will show a flashing "INS". Wait for the flashing to stop to clear the F5 error code.

Press the center button or turn the switch to turn on the screen. Check if it shows a flashing "INS". If it does, the engine is in reverse mode. Please wait until the flashing stops.

$\"\"$

When "INS" stops blinking, screw the product onto the radiator.

$\"\"$

Ensure a tight connection to prevent leakage.
Press the mode button, and "AdA" will flash on the display for about 5 seconds, indicating that adjustment is in progress to fit the product to the valve.

$\"\"$

The initialization screen will then appear, showing that the product has been installed successfully.

$\"\"$

\n","2025-01-23T04:17:44.000+00:00",[112,117,118],{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},"66320345bfe5a6002dbee42e","guide-installation","标记文章为安装说明页面","https://manual-admin.rti-tek.fr/tag/guide-installation/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},"https://manual-admin.rti-tek.fr/3-en-install-164/","Installing the Adapter\nFirst, check if your valve interface is M30 x 1.5mm.\n\n * If your valve interface is M30 x 1.5mm, you can directly install the product\n on the valve.\n * If your valve interface is not M30 x 1.5mm, you will need to install an\n adapter.\n\nAdapter Installation Process\nIf you find that the valve connector type is not M30 x 1.5 mm, you need to\ninstall the adapter onto the valve.\n\nTo do this, follow these steps:\n\n 1. Check your valve's connector type.\n\n\n\n 2. Choose the correct",3,"3",{"_15":125,"_17":126,"_19":127,"_21":128,"_23":129,"_25":125,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":130,"_35":130,"_36":130,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":131,"_70":139,"_59":140,"_73":141,"_75":142,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":143,"_85":6},"6791c30dffa1640052c42a58","b51f760e-7463-43bc-a906-fa085154811b","App Guide","4-en-app-guide-160","

Software Installation

Attention

Please make sure to enable Bluetooth and Wi-Fi on your phone. Also, check that your phone lets the Smart Life app use Bluetooth functionality.

Download the Smart Life app

Please click on the image below to go to the link or search for "Smart Life" on Google Play and the App Store to download the Smart Life app.

$\"\"$

Register or Log In

Attention

If you don't have an account, some features of the app won't be available (Experience Mode still supports HomeKit).

Tap the app icon to go to the Login or Immediate Experience screen.

$\"\"$

Register

On the login/home screen, click "Register."
Please read and check the boxes for "Privacy Policy," "User Agreement," and "Children's Privacy Protection Statement."
Select the country or region for the account registration, then enter your email address and click "Send Verification Code."

$\"\"$

Enter the code.

$\"\"$

Set a password and click "Complete Registration" to finish.

$\"\"$

Log In

When using a "Smart Life App Account" to log in:

On the login/experience page, click "Log in."
Select your country or region.

$\"\"$

Read and tick "I agree to the Privacy Policy, User Agreement, and Child Privacy Protection Statement." Then fill in your Smart Life app account and password.

$\"\"$

Choose whether to enable the "Feature Experience Upgrade Plan" and "Personalized Push Service." Then, click "Enter app" at the top right corner to complete the login.

Add a Device

Attention

Please turn on Bluetooth and Wi-Fi on your phone first, and check that your phone's operating system lets the Smart Life App use Bluetooth.

How to Enter Network Settings Mode

Press the middle button or turn the knob to wake up the screen, then turn the knob counterclockwise until the screen displays "OFF." Next, press and hold the middle button for over 3 seconds until the screen shows a blinking "O."

$\"\"$

Connecting a Device with the App

Go to the "Home" screen of the app, click the plus (+) icon in the upper right corner of the Home screen, and select "Add Device".

$\"\"$

The system will automatically search for devices in network setup mode and display them. Tap the device you want to connect.

$\"\"$

When the app prompts you to "Please enter Wi-Fi information", choose your 2.4GHz Wi-Fi network, enter the password, and then tap "Next".

$\"\"$

Once the device is added successfully, it will be shown in the device display area on the "Add Device" screen. Tap "Done" to complete the setup process.

$\"\"$

Attention

Failed to add the display device. Please check the following items and try again:

Make sure the device is turned on.
Ensure the gateway, device, and phone are close to the router.
Verify that the device is in pairing mode.

Adjusting Temperature

Slide to Adjust Temperature: Slide your finger on the screen to set the temperature you want.
Automatic Mode Matching: When your set temperature matches a mode's preset temperature, the system will switch to that mode automatically.

$\"\"$

Switching Modes

Slide to Adjust Temperature: Use your finger to slide on the screen to set the desired temperature and mode.
Automatic Mode Matching: When the set temperature matches a mode's preset temperature, the system automatically switches to that mode.

$\"\"$

Check Data

Simply open the app and tap "Check Data."

$\"\"$

You can view hourly, daily, or monthly temperature history.

$\"\"$

Ecogaz Forecast Data

Open the main screen of the app and tap "Ecogaz Forecast Data."

$\"\"$

You can see the natural gas forecast for the next 5 days, so you can adjust your gas usage more effectively.

$\"\"$

Green Indicator: Our natural gas usage is at a sustainable level. No action needed; continue using as usual.

Yellow Indicator: Our natural gas usage is higher than ideal. Please moderate your usage.

Orange Indicator: The natural gas network is under stress. By adjusting our usage, everyone can help avoid more drastic measures and keep the supply stable.

Red Indicator: The natural gas network is under significant strain. Instructions to reduce load may be issued soon; we should minimize usage as much as possible to quickly return to normal.

Settings Menu

Open the main screen of the app, swipe up until you reach the bottom of the screen, and tap "Settings."

$\"\"$

Here, you can modify these settings.

$\"\"$

Attention

1. If your window switch is in the off position, the device will not be able to detect a temperature drop and will continue heating.

2. Since the temperature is measured at the duct, the temperature throughout the entire room may vary. To account for this, you can calibrate the room sensor within a range of ±10℃.

To access advanced features

Select 'Advanced Settings' to enter the advanced settings screen.

$\"\"$

Here, you can adjust the following settings.

$\"\"$

System mode settings

Energy-Saving Mode (Factory Setting): Within a default range of 0.5°C, the device automatically starts or stops heating to avoid continuous heating. This conserves energy while keeping you comfortable.

Comfort Mode: PID (Proportional-Integral-Derivative) control algorithm. The device automatically adjusts the valve to maintain the temperature in a very narrow range around the set point. The valve does not fully close, ensuring the temperature remains stable.

Attention

Comfort Mode uses more energy than Energy-Saving Mode. Please select the system mode based on your needs.

\n","2025-01-23T04:18:21.000+00:00",[132,137,138],{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},"66320369bfe5a6002dbee430","guide-software","标记文章为软件指导内容","https://manual-admin.rti-tek.fr/tag/guide-software/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},"https://manual-admin.rti-tek.fr/4-en-app-guide-160/","Software Installation\n{{#attention}}\n\nAttention\nPlease make sure to enable Bluetooth and Wi-Fi on your phone. Also, check that\nyour phone lets the Smart Life app use Bluetooth functionality.\n\n{{/attention}}\n\nDownload the Smart Life app\nPlease click on the image below to go to the link or search for \"Smart Life\" on\nGoogle Play and the App Store to download the Smart Life app.\n\n{{#link href=\"https://smartapp.tuya.com/smartlife\"}}\n\n\n\n{{/link}}\n\nRegister or Log In\n{{#attention}}\n\nAttention\nIf you do",5,"4",{"_15":145,"_17":146,"_19":147,"_21":148,"_23":149,"_25":145,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":150,"_35":150,"_36":150,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":151,"_70":158,"_59":159,"_73":160,"_75":161,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":162,"_85":6},"6791c350ffa1640052c42a5f","24ba9cc6-8f23-40e6-aaed-703699a8fcab","Product Features","5-en-product-features-153","

Temperature Settings

Device

Use the rotary knob to adjust the temperature in 0.5°C steps.

$\"\"$

App

Swipe to Set Temperature: Simply swipe your finger on the screen to set the temperature you want.
Auto Mode Matching: When your set temperature aligns with a specific mode's preset temperature, the system will automatically switch to that mode.

$\"\"$

Temperature Control Modes

Attention

Until the device's network configuration is complete, only manual mode is available.
The device supports displaying the set temperature and room temperature alternately. When "SET" lights up, the display shows the set temperature.

Switch Modes

Device:

Press the middle button or rotate the knob to wake up the screen.
Press the middle button to switch modes. (Limited to Comfort Mode, Eco Mode, Freeze Protection Mode, Program Mode, and Off Mode)

$\"\"$

App:

Slide to set temperature: Use your finger to slide on the screen to adjust the temperature and mode.
Auto mode switch: When the temperature you set matches a mode's preset temperature, the system switches to that mode automatically.

$\"\"$

General Mode

The default temperatures for Comfort, Eco, and Anti-Frost Mode can be adjusted under the "Mode Temperature" section in the "Settings" menu.

Attention

The preset temperatures for Comfort mode, Energy-saving mode, and Anti-freeze mode can be adjusted under the "Mode Temperature" option in the "Settings" menu.

Full On Mode

Quickly heat the room to reach a warm temperature.

Device:

Press the middle button or turn the switch to wake up the screen.
Turn the knob clockwise.
When the display screen shows "ON", the setting is complete.

$\"\"$

App：

Swipe to set the temperature: use your finger to swipe across the screen and adjust to Full On Mode.

$\"\"$

Comfort Mode (Default temperature: 20°C)

The system will automatically set the temperature to the comfort mode temperature.
The radiator will start heating until it reaches the set temperature.
The radiator will keep working to maintain your preset temperature.

Device:

Press the center button or turn the switch to wake up the screen.
Press the center button to change modes.
When the display shows the comfort mode icon, the setting is complete.

$\"\"$

App:

Swipe to Set Temperature: Slide your finger on the screen to adjust to Comfort Mode.

$\"\"$

Eco Mode (Default System Temperature 15°C)

The system will automatically set the temperature to energy-saving mode.
By setting a lower temperature, you can reduce the difference from the comfort mode.
Switching back to comfort mode helps prevent unnecessary energy consumption.

Device:

Press the center button or turn the switch to wake up the screen.
Press the center button to change modes.
When the screen displays the energy-saving mode icon, it means the setting has been applied.

$\"\"$

App:

Adjust the temperature: Slide your finger on the app interface to set it to Eco Mode.

$\"\"$

Anti-Freeze Mode (Default Temperature: 5°C)

Continuously monitor the surrounding temperature.
When the temperature drops too low (below the set antifreeze temperature), turn on the antifreeze mode.
Automatically open the valve to heat the whole pipeline.
Keep the temperature at the set antifreeze level to prevent the pipes from freezing and bursting.

Device:

Press the center button or turn the switch to wake up the screen.
Press the center button to change modes.
When the screen displays the freeze protection mode icon, it means the setting has been applied.

$\"\"$

App:

Set Temperature: Slide your finger on the screen to adjust to anti-freeze mode.

$\"\"$

Complete Shutdown Mode

Attention

The anti-freeze protection function in full-close mode can be turned on/off in the advanced settings.

Turn on the freeze protection mode to keep the pipes from freezing.
The system continuously monitors the current room temperature.
If the room temperature drops below 5°C, the valve will automatically open.
If the room temperature goes above 7°C, the valve will automatically close.

Device:

Press the center button or turn the switch to wake up the screen.
Press the center button to change modes.
When the screen reads "OFF", it means the setting has been applied.

$\"\"$

App:

Slide to Set Temperature: Use your finger to swipe on the interface to set to Complete Shutdown Mode.

$\"\"$

Custom Mode

The temperature control system adjusts based on the temperature you set.
This temperature setting will stay active until you manually change the temperature setting again.

Device:

Press the central button or turn the switch to wake up the screen.
Turn the switch to set the desired temperature (the temperatures in Off, Comfort, Energy-Saving, Anti-Freeze, and Full On modes do not support custom mode).
When the display shows the custom mode icon, it means the setting was successful.

$\"\"$

App:

To set the current temperature: Use your finger to slide on the screen to set the desired temperature (custom mode cannot be activated at temperatures set to fully off, comfort, energy-saving, anti-freeze, or fully on).

$\"\"$

Vacation Mode

Attention

Control and configure vacation mode using the app.
Set the vacation length (1-60 days).
The radiator will only heat to maintain the room temperature at 5°C to prevent pipe freezing.
When the set duration ends, the system will revert to the previous mode.

Device:

When you see both the vacation mode and antifreeze mode icons on the display at the same time, it means the settings were applied successfully.

$\"\"$

App:

Open the main screen of the app, Click the mode switch module in the upper left corner.

$\"\"$

Tap on the "Vacation" section.

$\"\"$

Swipe across the screen to set the duration of your vacation, then tap the "Confirm" button in the top right corner of the "Vacation Duration" section.

$\"\"$

When the "Auto" screen in the app shows 5°C and the vacation mode icon turns green, it means the vacation mode is set successfully.

$\"\"$

You can cancel vacation mode through the following methods:

The mode will automatically stop when the set time expires.
Change to another mode (scheduled mode/manual mode) in the app.
On the device, hold down the "mode button" for more than three seconds to manually exit vacation mode.

Programming Mode

Each day, a radiator can save up to 6 heating settings with custom temperature settings.

Attention

The settings for programming mode can only be adjusted via the app. On the device, you can only switch modes.

Device:

Press the center button or turn the switch to wake up the screen.
Press the center button to change modes.
When the display shows the programming mode icon, the setting is complete.

$\"\"$

App：

Open the main screen of the app, Click the mode switch module in the upper left corner.
Tap the "Weekly Programming" tab.

$\"\"$

Set the days (Sunday to Saturday), tap the "Timer" tab, and select the time slots (you can set 1 to 6 slots per day).

$\"\"$

You can set each time point to:
\n
1. Specific time (hour and minute)
  \n
2. Mode or specific temperature
  \n
  1. Supported mode options include:
    \n
    1. Comfort
    2. ECO
    3. Anti-frost
    4. Custom
    \n
  2. Temperature: If you choose 'Custom,' you can set a specific temperature.
    \n
  \n
\n

$\"\"$

Click the checkmark (✔️) in the top-right corner of the 'Weekly Programming' module to finish setting up the weekly schedule.

$\"\"$

Boost Mode

Attention

Boost mode can only be operated and set through the app.
When Boost mode is turned on, the valve will completely open to heat up quickly. After the set time, it will automatically switch back to Vacation mode.

Device:

When the product display shows "BST", it means the setting was successful.

$\"\"$

App:

In Vacation Mode/Programming Mode, tap the mode switch module in the upper left corner, and then tap the "Boost" switch option.

$\"\"$

Select the duration (30, 60, 90, or 120 minutes).

$\"\"$

When the app's Auto screen shows that Boost Mode is activated, it indicates the Boost Mode setting is successful.

$\"\"$

You can cancel or extend the boost mode in the following ways:

The boost mode will automatically stop when the set time expires.
The app sets the modification time or exit mode.
Switch to another mode (e.g., programming mode or manual mode) through the app, and the boost mode will stop.

Window Detection

Device:

The window detection function can only be set up via the app.

App:

Open the app and go to the main interface. Swipe up with your finger until you reach the bottom.
Click "Settings".

$\"\"$

Tap on "Detection Switch" to configure settings.

$\"\"$

When the open-window detection feature is enabled

Monitoring the room temperature: The device continuously tracks the indoor temperature.
Detecting a temperature drop: If the device notices that the room temperature falls by more than 1.5℃ within 5 minutes during heating.
Stop heating: The device will stop heating to save energy.
After activating the open-window function, the device will keep the valve closed for 30 minutes, and the screen will show the open-window detection icon.

$\"\"$

Attention

You can cancel the window detection in the following ways:

Adjust the temperature or change the mode using the app or the device.
If the detected temperature increases by more than 1.5°C within 5 minutes.
Do nothing, and the mode will automatically exit after 30 minutes.
Enable or disable the window detection feature via the app.

Screen Display Rotation and Brightness Adjustment

Screen Display Rotation

Device:

Using the middle button on the adapter as a reference point, make sure the middle button is facing upwards.
Use both hands to pinch the latches on both sides of the battery compartment, then slide the cover upwards to remove it.
Press the middle button or turn the switch to wake up the screen.
Press the middle button to change modes.
Set the mode to all-off.

$\"\"$ \n6. Press the 'Set' button to rotate the screen.

$\"\"$

App:

Open the app and go to the main menu, Select 'Settings'.
Select 'Direction' under the 'Screen' settings.

$\"\"$

Choose the screen orientation (up/down) in the 'Direction' settings.

$\"\"$

In 'Direction' settings, tap the 'Confirm' button in the top right corner to save changes.

$\"\"$

Adjusting Screen Brightness

Device:

The screen brightness can only be adjusted through the app.

App:

Open the app and go to the main menu, then tap "Settings."
Tap "Screen," then select "Brightness."

$\"\"$

In the "Brightness" settings, choose your preferred brightness level (low/medium/high).

$\"\"$

Tap "Confirm" in the upper right corner to save your changes.

$\"\"$

Child Safety Lock

Attention

Please ensure the device is in complete shutdown mode. The child safety lock cannot be activated when the device is completely shut down.
If the device is completely shut down, switch to another mode first, then activate the child safety lock.

Device:

Press the middle button or turn the switch to wake up the screen.
Press and hold the middle button for more than 3 seconds. If the child lock icon appears or disappears on the screen, the setting is successful.

$\"\"$

App：

Open the app, go to the main screen, and tap on 'Child Lock'.

$\"\"$

Factory Reset

Attention

Before performing a factory reset, make sure the device is turned off and the battery is removed.
If you perform a factory reset, all your previous settings will be lost.

Device:

Hold down the middle button and insert the battery at the same time.

$\"\"$

When "FAC" appears on the screen and flashes for 3 seconds, the factory reset is complete, and the device will restart.

$\"\"$

App:

You can only reset to factory settings through the device itself. The app cannot be used to reset to factory settings.

Anti-Scale Protection Mode

Attention

The device and the app cannot change its settings.

Every Monday at 12:00 PM, the device will run for a set period to prevent the valve from calcifying. During this time, "CAL" will appear on the screen.

$\"\"$

Power Loss Memory Feature

After a power loss, when power is restored, the device will keep its current mode and resume operation as before.

\n","2025-01-23T04:19:28.000+00:00",[152,156,157],{"_15":153,"_46":154,"_21":154,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":155},"663ce1c8bfe5a6002dbee5ad","guide-main-function","https://manual-admin.rti-tek.fr/tag/guide-main-function/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":153,"_46":154,"_21":154,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":155},"https://manual-admin.rti-tek.fr/5-en-product-features-153/","Temperature Settings\nDevice\nUse the rotary knob to adjust the temperature in 0.5°C steps.\n\n\n\nApp\n 1. Swipe to Set Temperature: Simply swipe your finger on the screen to set the\n temperature you want.\n 2. Auto Mode Matching: When your set temperature aligns with a specific mode's\n preset temperature, the system will automatically switch to that mode.\n\n\n\nTemperature Control Modes\n{{#attention}}\n\nAttention\n 1. Until the device's network configuration is complete, only manual mode is\n avail",11,"5",{"_15":164,"_17":165,"_19":166,"_21":167,"_23":168,"_25":164,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":169,"_35":169,"_36":169,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":170,"_70":178,"_59":179,"_73":180,"_75":181,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":182,"_85":6},"6791c352ffa1640052c42a66","d2215d1b-dffa-4f10-8954-01b61387d878","Technical specifications","6-en-technical-specifications-152","\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Name	Specification
Power	3×1.5V Alkaline AA batteries
Standby current	6μA Min
Operating temperature	O ~ 50°C, for indoor use only
Storage temperature	-20~70°C
Wi-Fi	802.11b/g/n(2.4GHz)
Wi-Fi range	200m+ in the open field
Temperature sensor	NTC，B=3380，R25=10KΩ±1%
Protection level	IP20
Surface temperature	90°C Max （at the radiator）
Connection	M30×1.5mm
Linear travel	6mm
Compatibility	Compatible with most radiators available on the market.
Valve Adaptation	Danfoss RA valves、Danfoss RAV valves、Danfoss RAVL valves 、Caleffi valves、Giacomini valves、M28 valves

\n","2025-01-23T04:19:30.000+00:00",[171,176,177],{"_15":172,"_46":173,"_21":173,"_48":174,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":175},"6632039abfe5a6002dbee434","guide-tech-specification","标记文章为技术参数页面","https://manual-admin.rti-tek.fr/tag/guide-tech-specification/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":172,"_46":173,"_21":173,"_48":174,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":175},"https://manual-admin.rti-tek.fr/6-en-technical-specifications-152/","NameSpecificationPower3×1.5V Alkaline AA batteriesStandby current6μA Min\nOperating temperatureO ~ 50°C, for indoor use onlyStorage temperature-20~70°C\nWi-Fi802.11b/g/n(2.4GHz)Wi-Fi range200m+ in the open fieldTemperature sensor\nNTC，B=3380，R25=10KΩ±1%Protection levelIP20Surface temperature90°C Max （at the\nradiator）ConnectionM30×1.5mmLinear travel6mmCompatibilityCompatible with most\nradiators available on the market.Valve AdaptationDanfoss RA valves、Danfoss RAV\nvalves、Danfoss RAVL valves 、Caleffi ",0,"6",{"_15":184,"_17":185,"_19":186,"_21":187,"_23":188,"_25":184,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":189,"_35":189,"_36":189,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":190,"_70":198,"_59":199,"_73":200,"_75":181,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":201,"_85":6},"6791c353ffa1640052c42a6d","24466b5c-e674-4cce-bce6-adf708201a45","Troubleshooting","7-en-troubleshooting-151","\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Code	Problem	Solution
F0	Temperature sensor anomaly	Contact the customer service staff
F1	Slow valve operation	Check the installation and heating valve
F2	The stroke is too long	Check the fastening of TRV
F3	The stroke is too short	Check the heating valve
F4	The battery is empty	Replace batteries immediately
F5	Valve not detected	Check whether the valve is installed
F6	The batteries are of poor quality and not enough to power the motor	Replace batteries immediately

\n","2025-01-23T04:19:31.000+00:00",[191,196,197],{"_15":192,"_46":193,"_21":193,"_48":194,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":195},"663203babfe5a6002dbee436","guide-troubleshooting","标记文章为故障排除页面","https://manual-admin.rti-tek.fr/tag/guide-troubleshooting/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":192,"_46":193,"_21":193,"_48":194,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":195},"https://manual-admin.rti-tek.fr/7-en-troubleshooting-151/","CodeProblemSolutionF0Temperature sensor anomalyContact the customer service\nstaffF1Slow valve operationCheck the installation and heating valveF2The stroke\nis too longCheck the fastening of TRVF3The stroke is too shortCheck the heating\nvalveF4The battery is emptyReplace batteries immediatelyF5Valve not detected\nCheck whether the valve is installedF6The batteries are of poor quality and not\nenough to power the motorReplace batteries immediately","7",{"_15":203,"_17":204,"_19":205,"_21":206,"_23":207,"_25":203,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":208,"_35":208,"_36":208,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":209,"_70":217,"_59":218,"_73":219,"_75":220,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":221,"_85":6},"6791c355ffa1640052c42a74","dc9e651f-4f81-4fbc-ba66-efb3e3051437","FAQ","8-en-faq-150","

Q: Does the product comply with the requirements of EN 12098-1 and EN 12098-3?

A: Yes. This product is used to control water heaters and has product functions that comply with the EN 12098-1 standard. It is programmable and allows the room temperature to be adjusted step by step according to requirements. It can be installed in all rooms of the house where water heaters are installed and regulated according to time periods.

Q: Does the product meet the functional requirements of Class B or Class A of the NF EN ISO 52120-1 standard?

A: Yes. The product comes with a temperature sensor that allows the app to remotely collect the temperature of the device in the room. It also supports the management of interval programming and related temperature settings; room-by-room temperature regulation; centralized temperature regulation, etc. It meets the functional requirements of Class B of standard NF EN ISO 52120-1.

Q: Is there a centralized device that can send out set points to adjust the output of each water heater?

A: Yes, users can control the output of different water heaters through the product's application, select different heating modes as needed, and issue set values in the temperature control mode to adjust the output of the electric heater.

Q: Does the device include sensors to measure the ambient temperature in each room? Can the room temperature be measured with an accuracy of ±0.8K according to EN 12098-1?

A: Yes, both the TRV and the receiver are equipped with Murata's high sensitivity

10KQ ±1% 3380 temperature sensor. It provides accurate and sensitive temperature measurement.

Q: Can all settings, including time settings for each room, program execution, etc., be made locally? If the network connection is interrupted, will the controller continue to work?

A: Yes. If the network is down, the thermostat will still operate according to the set heating schedule. The thermostat can be manually switched between different heating modes using the buttons on the product itself, without using the app.

Q: Does the device allow the user to deviate from its instructions locally?

A: Yes. The thermostat's automatic mode allows for temporary changes to the heating mode. This means that the user can partially deviate from the existing settings without affecting the programmed settings.

Q: Can this device access Ecogaz signals?

A: Yes, the APP can synchronize Ecogaz signals, and users can view Ecogaz's natural gas weather forecast for the next 4 days in the APP.

\n","2025-01-23T04:19:33.000+00:00",[210,215,216],{"_15":211,"_46":212,"_21":212,"_48":213,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":214},"6632037abfe5a6002dbee432","guide-faq","标记文章为 FAQ 页面","https://manual-admin.rti-tek.fr/tag/guide-faq/",{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":211,"_46":212,"_21":212,"_48":213,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":214},"https://manual-admin.rti-tek.fr/8-en-faq-150/","Q: Does the product comply with the requirements of EN 12098-1 and EN 12098-3?\n\nA: Yes. This product is used to control water heaters and has product functions\nthat comply with the EN 12098-1 standard. It is programmable and allows the room\ntemperature to be adjusted step by step according to requirements. It can be\ninstalled in all rooms of the house where water heaters are installed and\nregulated according to time periods.\n\nQ: Does the product meet the functional requirements of Class B or Cla",2,"8","routes/$lang.$tagName.$slug",{"_224":225,"_12":226,"_275":276,"_283":284},"productName","TRV",[227,233,239,245,251,257,263,269],{"_15":16,"_17":18,"_19":20,"_21":22,"_23":24,"_25":16,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":34,"_35":34,"_36":34,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":228,"_70":232,"_59":72,"_73":74,"_75":76,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":84,"_85":6},[229,230,231],{"_15":45,"_46":47,"_21":47,"_48":49,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":60},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":45,"_46":47,"_21":47,"_48":49,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":60},{"_15":87,"_17":88,"_19":89,"_21":90,"_23":91,"_25":87,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":92,"_35":92,"_36":92,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":234,"_70":238,"_59":101,"_73":102,"_75":76,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":103,"_85":6},[235,236,237],{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},{"_15":105,"_17":106,"_19":107,"_21":108,"_23":109,"_25":105,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":110,"_35":110,"_36":110,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":240,"_70":244,"_59":120,"_73":121,"_75":122,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":123,"_85":6},[241,242,243],{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},{"_15":125,"_17":126,"_19":127,"_21":128,"_23":129,"_25":125,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":130,"_35":130,"_36":130,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":246,"_70":250,"_59":140,"_73":141,"_75":142,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":143,"_85":6},[247,248,249],{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},{"_15":145,"_17":146,"_19":147,"_21":148,"_23":149,"_25":145,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":150,"_35":150,"_36":150,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":252,"_70":256,"_59":159,"_73":160,"_75":161,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":162,"_85":6},[253,254,255],{"_15":153,"_46":154,"_21":154,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":155},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":153,"_46":154,"_21":154,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":155},{"_15":164,"_17":165,"_19":166,"_21":167,"_23":168,"_25":164,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":169,"_35":169,"_36":169,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":258,"_70":262,"_59":179,"_73":180,"_75":181,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":182,"_85":6},[259,260,261],{"_15":172,"_46":173,"_21":173,"_48":174,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":175},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":172,"_46":173,"_21":173,"_48":174,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":175},{"_15":184,"_17":185,"_19":186,"_21":187,"_23":188,"_25":184,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":189,"_35":189,"_36":189,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":264,"_70":268,"_59":199,"_73":200,"_75":181,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":201,"_85":6},[265,266,267],{"_15":192,"_46":193,"_21":193,"_48":194,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":195},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":192,"_46":193,"_21":193,"_48":194,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":195},{"_15":203,"_17":204,"_19":205,"_21":206,"_23":207,"_25":203,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":208,"_35":208,"_36":208,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":270,"_70":274,"_59":218,"_73":219,"_75":220,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":221,"_85":6},[271,272,273],{"_15":211,"_46":212,"_21":212,"_48":213,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":214},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":211,"_46":212,"_21":212,"_48":213,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":214},"post",{"_15":105,"_17":106,"_19":277,"_21":108,"_23":109,"_25":105,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":110,"_35":110,"_36":110,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":278,"_70":282,"_59":120,"_73":121,"_75":122,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5},"3/en Install",[279,280,281],{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":113,"_46":114,"_21":114,"_48":115,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":116},"pagination",{"_285":286,"_292":293},"prev",{"_15":87,"_17":88,"_19":89,"_21":90,"_23":91,"_25":87,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":92,"_35":92,"_36":92,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":287,"_70":291,"_59":101,"_73":102,"_75":76,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":103,"_85":6},[288,289,290],{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":95,"_46":96,"_21":96,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":97},"next",{"_15":125,"_17":126,"_19":127,"_21":128,"_23":129,"_25":125,"_26":-5,"_27":28,"_29":30,"_31":32,"_33":130,"_35":130,"_36":130,"_37":-5,"_38":-5,"_39":-5,"_40":-5,"_41":-5,"_42":294,"_70":298,"_59":140,"_73":141,"_75":142,"_77":78,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_79":-5,"_80":-5,"_81":-5,"_82":-5,"_83":143,"_85":6},[295,296,297],{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},{"_15":62,"_46":63,"_21":64,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":65},{"_15":67,"_46":68,"_21":68,"_48":-5,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":69},{"_15":133,"_46":134,"_21":134,"_48":135,"_26":-5,"_29":30,"_50":-5,"_51":-5,"_52":-5,"_53":-5,"_54":-5,"_55":-5,"_56":-5,"_57":-5,"_38":-5,"_39":-5,"_41":-5,"_58":-5,"_59":136},"actionData","errors"]